352-011 exam is the practical test of Cisco CCDE certification, which is for expert-level network design engineers, expert-level network leads of IT infrastructure teams, and expert-level network leads of architecture teams working in job roles that require them to translate business needs, budget, and operational constraints into the design of a converged solution. We just cracked the latest CCDE Practical Exam 352-011 dumps questions, which are helpful for you to prepare 352-011 exam. To prepare this Cisco CCDE 352-011 exam well, the following 352-011 CCDE official information is helpful in the preparation.
Cisco 352-011 CCDE Practical Exam
Cisco CCDE Practical 352-011 Exam is an 8-hour, scenario-based exam, which validates that professionals have the expertise to gather and clarify network functional requirements, develop network designs to meet functional specifications, develop an implementation plan, convey design decisions and their rationale, and possess expert-level network infrastructure knowledge. You can register Cisco 352-011 CCDE practical exam at Pearson VUE testing center.
Note: On November 2, 2021, Cisco will release v3.0 of the CCDE certification.
352-011 CCDE Cisco Practical Exam Topics
352-011 CCDE Cisco Practical exam topics cover the following details.
Practice Cisco 352-011 CCDE Practical Exam Dumps
Cisco certification 352-011 CCDE practical exam dumps can help you test all the above topics. Our new cracked Cisco 352-011 CCDE practical exam dumps questions are your best choice. Share some CCDE Practical Exam 352-011 exam dumps questions and answers below.
1.Which three reasons to deploy an IDS sensor in promiscuous mode when you design a security solution are true? (Choose three.)
A. Solution should be resistant to sensor failure.
B. Solution should allow for signature-based pattern matching.
C. Solution should allow for stream normalization.
D. Solution should allow to deny packets inline.
E. Solution should not impact jitter and latency for voice traffic.
Answer: A,B,E
2.An operations engineer asks for your help with a new switching deployment. The engineer confirms that STP is enabled on an edge switch, and a particular port is connected to another switch. The switch is not receiving configuration BPDUs, although it appears that everything is functioning correctly in the network. What is the design explanation?
A. Bridge Assurance is enabled on the port
B. Storm control broadcast is enabled on the port
C. BPDU Guard is enabled on the port
D. REP is enabled on the port
Answer: D
3.VPLS is implemented in a Layer 2 network with 2000 VLANs. Which must be the primary concern to ensure successful deployment of VPLS?
A. PE scalability
B. VLAN scalability
C. Flooding is necessary to propagate MAC address reachability information
D. The underlying transport mechanism
Answer: C
4.Which two options are design considerations when introducing FCoE into an existing network? (Choose two)
A. The existing network must support a MTU of 3280 bytes
B. The FCoE QoS markings may overlap with call signaling QoS markings
C. Optical cabling is needed to transmit FCoE traffic between a server and its directly connected Ethernet switch
D. Twinaxial cabling can be used to transmit FCoE traffic between a server and its directly connected Ethernet switch, if it is less than 10 meters
E. All the servers in the data center must be retrofitted with converged Network Adapters
Answer: B,E
5.In an OSPF network, users in a particular OSPF non-backbone area are complaining about show access speeds to a shared corporate resource in another OSPF area. Traceroutes show that the users are taking a suboptimal default route to the destinations. Which solution will improve access speed?
A. Leak specific summaries on the ABRs for the remote subnets in addition to the default
B. Make the area totally stubby so that the default can be followed along the best path
C. Create a virtual link between the areas so that traffic can shortcut directly between them
D. Implement policy routing to channel the traffic in the optimal direction
Answer: A
